Siding Replacement Cost in 2026: What Homeowners Pay

Reading Progress:

Siding Replacement Cost in 2026: What Homeowners Pay

Siding replacement cost in 2026 runs from $8,000 to $30,000 for most homes, with a national average near $19,000 and installed prices of about $6 to $20 per square foot depending on the material. Vinyl sits at the low end around $6.13 per square foot installed, while fiber cement runs near $9.00 and premium options like stone and brick veneer climb much higher. Your total depends on three things: how much wall area your home has, the material you pick, and local labor rates. This guide breaks down 2026 prices by material, explains what drives the cost up or down, and shows how a home warranty from Empire Home Protect fits into a smart home-protection budget.

Key Takeaways

  • Full siding replacement costs $8,000 to $30,000 in 2026, with a typical national average around $19,000 for a single-family home.
  • Vinyl is the cheapest common material at roughly $6.13 per square foot installed; fiber cement runs about $9.00 and stone veneer $14 or more.
  • Material choice and home size drive most of the price, followed by removal of old siding, sheathing repairs, and regional labor rates.
  • Home warranties cover systems and appliances, not siding, so exterior projects remain an insurance or out-of-pocket expense for homeowners.
  • Replacing failing siding before a sale is a high-return upgrade that improves curb appeal and prevents inspection objections.

How Much Does Siding Replacement Cost in 2026?

Siding replacement cost is the total price to remove old exterior cladding and install new material across a home’s walls, typically $8,000 to $30,000 in 2026. The national average lands near $19,000 for a full single-family home. That figure blends materials, labor, old-siding removal, and disposal into one project price.

Because siding is priced per square foot of wall area rather than floor area, two homes with the same interior size can cost very different amounts. A tall two-story home with lots of gables and corners needs more material and labor than a simple single-story ranch. According to This Old House, a vinyl job on a 2,000-square-foot home averages about $12,252 installed, while cedar on the same home can reach $23,400.

Siding Replacement Cost by Material

Siding replacement cost by material is the installed price per square foot for each cladding type, ranging from about $6 for vinyl to $20 for brick veneer. Material is the single biggest lever you control, so comparing per-square-foot rates is the clearest way to budget before you request quotes.

Siding Material Material Only (per sq ft) Installed (per sq ft) Best For
Vinyl $3.16 $6.13 Budget-conscious, low maintenance
Aluminum $4.11 $7.32 Fire resistance, coastal areas
Fiber cement $5.37 $9.00 Durability and curb appeal
Stucco $6.36 $9.66 Southwest and warm climates
Cedar / wood $8.95 $11.70 Natural look, traditional homes
Stone veneer $11.41 $14.16 High-end accent and full walls
Brick veneer $15.30 $20.00 Longevity, premium resale

Per-square-foot figures above reflect 2026 national averages compiled by This Old House from Homewyse data. On a 2,000-square-foot home, these rates translate into roughly $12,252 for vinyl, $14,649 for aluminum, and $28,320 for stone veneer, before any extras.

What Drives Siding Costs Up or Down?

Siding cost drivers are the project factors beyond the base material that raise or lower your final bill, including home size, old-siding removal, repairs, and labor rates. Knowing them helps you read a contractor’s quote and spot where the money goes.

  • Home size and shape: More wall area, extra stories, dormers, and corners all add material and labor.
  • Tear-off and disposal: Removing and hauling away old siding adds $1,000 to $3,000 on many jobs.
  • Sheathing and moisture repairs: Rotted sheathing or house wrap found during tear-off must be fixed first.
  • Insulation upgrades: Adding insulated siding or a house wrap raises cost but can lower energy bills, per the U.S. Department of Energy.
  • Labor and region: Rates in high-cost metros can run 20% to 40% above rural averages.

How to Budget for a Siding Replacement

Budgeting for siding replacement is the process of estimating your project cost, setting aside a contingency, and lining up financing or savings before work begins. A clear budget keeps surprises during tear-off from derailing the job.

  1. Measure or estimate your home’s exterior wall area in square feet (not floor area).
  2. Multiply by the installed per-square-foot rate for your chosen material from the table above.
  3. Add 10% to 20% for tear-off, disposal, trim, and possible sheathing repairs.
  4. Collect at least three written quotes from licensed, insured siding contractors.
  5. Reserve a contingency fund of roughly 15% for hidden damage uncovered mid-project.

Does a Home Warranty Help With Siding Costs?

A home warranty is a service contract that helps cover repair or replacement of major home systems and appliances when they fail from normal wear and tear. It does not cover siding, roofing, or other exterior structural components. Siding damage is generally handled through homeowners insurance (for sudden events like storms) or paid out of pocket (for age and wear).

Where a home warranty helps is your overall budget. When your furnace, air conditioner, water heater, or kitchen appliances break, those repairs can each run hundreds to thousands of dollars. With a plan from Empire Home Protect, coverage is provided for eligible system and appliance failures, and a covered repair is carried out by an independent service technician for the cost of your service fee. Keeping those unpredictable costs in check leaves more of your savings available for planned exterior projects like siding. To see what a plan includes, compare options on our home warranty plans page or read our 2026 home warranty rankings.

Frequently Asked Questions

How much does it cost to replace siding in 2026?

Most homeowners pay between $8,000 and $30,000 to replace siding in 2026, with a national average near $19,000 for a full house. The final price depends on your home’s square footage, the siding material you choose, and local labor rates.

What is the cheapest siding material to install?

Vinyl is the most affordable mainstream siding, averaging about $6.13 per square foot installed. On a 2,000-square-foot home that works out to roughly $12,252, which is why vinyl accounts for the largest share of replacement projects in the United States.

Does a home warranty cover siding replacement?

No. A home warranty covers major systems and appliances that fail from normal wear and tear, not exterior components like siding, roofing, or windows. Siding damage is usually a homeowners insurance or out-of-pocket expense, though protecting your systems frees up budget for exterior projects.

How long does siding replacement take?

A typical siding replacement on an average single-family home takes 1 to 2 weeks, depending on the material, weather, and whether old siding must be removed and the sheathing repaired. Fiber cement and stone veneer take longer than vinyl because they are heavier and slower to install.

Is it worth replacing siding before selling a house?

New siding is one of the higher-return exterior upgrades, often recovering a large share of its cost at resale and improving curb appeal. If your current siding is failing, replacing it before listing can prevent buyer objections and inspection issues that stall a sale.

Protect Your Home Systems and Budget

Siding is a major exterior investment, but the everyday failures that drain a homeowner’s budget are usually hidden systems and appliances. A home warranty from Empire Home Protect helps keep those costs predictable so you can plan for the big projects with confidence. Get your free home warranty quote today and see how affordable whole-home protection can be.

Related Articles


GET QUOTE CALL NOW